WHAT ARE OUR CUSTOMERS SAYING? LEARN MORE > RACING SEAT UNIVERSITY SHIPPING POLICY CONTACT US
FREE SHIPPING ON ALL Seat Pairs
NEED HELP? CALL 1-800-880-0960
Call: (800) 880-0960
Like our Facebook for up to $25 off!
Corbeau Custom Seat Brackets (Vehicle Specific Bolt-In)

Corbeau Custom Seat Brackets (Vehicle Specific Bolt-In)

Average Customer Rating:
(4.5 out of 5 based on 43 reviews)

Read Reviews | Write a Review
Why Buy From Us? Racing Seats USA
Select your vehicle (See comments in Description tab, below) Select Driver or Passenger or Both Driver & Passenger
Driver Side Bracket Only
Passenger Side Bracket Only
Both Driver & Passenger Side Brackets +$105
Double-Locking Sliders?
No, thanks
Yes! Upgrade My Driver Bracket Only! +$20
Yes! Upgrade My Passenger Bracket Only! +$20
Yes! Upgrade Both My Driver & Passenger Brackets! +$40
$105.00

for 1, including selected options

Quantity:

Corbeau Brackets allow a perfect fit of your Corbeau Seat into your car. They may work on other brands of seats as well--or not! If you purchase brackets for other seats they are a "special order / non-returnable" item. This means if you purchase Corbeau Racing Seat brackets and not seats, even if they do not fit you can not return them! (Image shown is one of over 600 brackets available. The Corbeau seat bracket for your car may vary slightly in design.)

DOUBLE LOCKING SLIDERS ARE BACK! Double locking sliders are available for Corbeau Seat Rails. While not every driver requires this feature on their Corbeau mounting brackets, double locking Corbeau seat sliders are suggested for vehicles that are aggressively driven in sanctioned competition.

Look for these comments in the "Select Custom Bracket" pulldown above.

  • (Adapter) - Adapts the Corbeau seat to fit the stock bracket
  • (Complete) - Not an Adapter--Complete Bracket
  • (Electric) - Original Seats had Electronic Adjustment. This is a bracket or non-slider adapter that allows you to retain this feature.

  • (60/40) - OE Seats were 60/40 Split Bench/Bucket
  • (Bench) - OE Seats were Bench Seats
  • *Bench* - This bracket is made to mount two seats. Only order one per vehicle.
  • (Bucket) - OE Seats were Bucket Seats

  • (Drill) - Installation Requires Drilling
  • *Driver Only* - No passenger-side bracket exists for this application.
  • (Floor Mnt) - Replaces entire pedestal-style OE Bracket and/or Base
  • (Measure) - Several versions were available. Provide us with the Front-Rear and Side-Side measurements of the bolt holes so we can ensure you get the right one!
  • (Narrow Seat) - Existance of this bracket does not guarantee all seats will fit. This is a very tight space--carefully measure before ordering!)
  • (No Slider) - Bracket re-uses the factory slider
  • (Ped Mnt) - Reuses (Mounts to) pedestal-style OE Base

  • Click here to see all the Corbeau racing seats

Videos
Reviews

Product Reviews

  Custom fit brackets,
Posted By:
1 people found this review helpful

Received brackets, look to be very high quality. Ordered with the double lock feature. Received very quickly without any issues.Would definitely recommend Racing Seats USA.

Was this rating helpful to you?   Yes No
  92 Chevy S10 Not even Close to fitting.,
Posted By:

Needed HEAVY modification to fit in my 93 Chevy S10.

Was this rating helpful to you?   Yes No
  what a headache,
Posted By:

The Brackets are too tall and my head hits the roof of my '82 Yoda....I'm only 5'11".....

Was this rating helpful to you?   Yes No
  double seat sliders 73 corvette,
Posted By:

Release lever is to close to floor to grab. They don't line up with factory mounting holes. Extensive mods. will be needed to make seats fit and fuction properly

Was this rating helpful to you?   Yes No
  BMW E36 Seat braxkets,
Posted By:

Very good qualityfor the price, install in my E36 M3 was very easy with the Corbeau Seat brackets! Very Satisfied with the whole package...Racing Seats USA provided excellent service & free shipping!

Was this rating helpful to you?   Yes No
  Corbeau Custom Seat Brackets,
Posted By:

Bought with Baja JP Seats. If you buy new seats, buy new brackets. Look great.

Was this rating helpful to you?   Yes No
  brackets,
Posted By:
1 people found this review helpful

Good quality, we'll made

Was this rating helpful to you?   Yes No
  Great Brackets,
Posted By:
1 people found this review helpful

I bought these for the A4 seats to go into a Jeep TJ. Everything lined up perfectly on the floor mounts along with the seat mounting holes. I did not have to do any drilling. Just bolt in and they were ready to go. One of the easiest jobs I have done on a Jeep.

Was this rating helpful to you?   Yes No
  Amazed,
Posted By:

I've bought seat brackets for specific applications before, and I have always had to modify them at least a little. Drill new bolt holes or something. I haven't actually installed these yet in my 1967 Mercury Cougar, but I have test fit them, and perfect fit!!! An exact match for a bolt in application. The only thing that impresses me more than the perfect fit of the brackets, was the speed of my order completion..

Was this rating helpful to you?   Yes No
  Seat brackets,
Posted By:
1 people found this review helpful

I have a 06 Nissan 350z and I ordered the Corbeau A4 seats and custom seat brackets, and they are GREAT, brackets fit well and the seat are perfect fit for me, I'm 5 feet 10 inches and 175 pounds. Thank you guys very much for the help when I was ordering the seats.

Was this rating helpful to you?   Yes No
  mk3 supra seat bracket,
Posted By:
2 people found this review helpful

bolted right in, made install a breeze in my mk3 supra.

Was this rating helpful to you?   Yes No
  Disappointing,
Posted By:
1 people found this review helpful

The sliders are typical Chinese quality; average quality, not high quality but functional.
The adapter was poor: Unfinished welds, grossly oversized bolt holes (sloppy), stacks of washers instead of solid spacers. For way over $100 each I expected better. I never even used them...made my own adapters instead; better quality that way.


Was this rating helpful to you?   Yes No
  Corbeau brackets,
Posted By:
2 people found this review helpful

Easy to install to seat. Seat belt tab is too far out. Hits tunnel and makes it very hard to bolt in all four bolts. Need to be half inch less. With seat belt and bolt head it is way too far out.

Was this rating helpful to you?   Yes No
  1957 chevy truck bracket,
Posted By:
1 people found this review helpful

Solid mount and holes lined up perfectly. Wish I would have paid a little more for the double lock on the passenger side too. But maybe that will be an upgrade later.

Was this rating helpful to you?   Yes No
  BMW E46 Drivers side double locking bracket,
Posted By:

Bracket quality is very good. However due to an inventory error the (critical) drivers side bracket arrived very late and Corbeau was unable to reroute the delivery to an alternate address in oreder to speed up the process. This caused much inconvenience to the installer.

Was this rating helpful to you?   Yes No
  BMW E46 passenger side double locking bracket,
Posted By:

Very well built dopuble locking bracket. Suggest using some aluminium componets to reduce the 13 lb weight.

Was this rating helpful to you?   Yes No
  Seat bracket,
Posted By:
1 people found this review helpful

Nothing vehicle specific about the base. One of the brackets didn't have he oles drilled for mounting. The drivers seat bracket was flimsy and felt loose from sliderails after attaching seat

Was this rating helpful to you?   Yes No
  S10 seat brackets,
Posted By:
1 people found this review helpful

perfect fit installed brackets and seats in less than an hour

Was this rating helpful to you?   Yes No
  Solid bracket,
Posted By:

Totally satisfied with the seat bracket. Made well. Nice people
to deal with. Great!


Was this rating helpful to you?   Yes No
  Great service,
Posted By:
1 people found this review helpful

One of the best sites to buy racing seats

Was this rating helpful to you?   Yes No
  not even close,
Posted By:

These brackets lined up perfect on the rear but not even close on the front of my 66 El Camino had to drill the floor for both front bolts But after mounting the seats in the car the brackets work fine.

Was this rating helpful to you?   Yes No
  A good seat bracket,
Posted By:

A good seat bracket turned better with the addition of the double slider. The bracket bolted in without trouble, as if manufactured by the factory. My only disappointment was that the bracket pictured must be a generic one, as no height-adjustment provisions were provided with my brackets. For my application (2003 Dodge Durango), some height adjustment could have been included.

Was this rating helpful to you?   Yes No
  seat track review,
Posted By:

The seat tracks I ordered were for a 1973 Porsche 911T, the tracks were not wide enough to bolt to the original seat attach points. I bolted seat to bottom attach points and do not have enough travel aft. The seat position me too high in the car also.

Was this rating helpful to you?   Yes No
  Corbeau passenger bracket,
Posted By:

Bracket bolted right on the Corbeau seat. Required very little manipulation to get the stock bolts to fit. Works well.

Was this rating helpful to you?   Yes No
  Double slider bracket,
Posted By:

I would have rated this excellent as it bolted right up, but the handle for the double slider kept slipping of the pegs and finally I had to take a rubber mallet to it for some extra persuasion.

Was this rating helpful to you?   Yes No
  Single locking seat brackets ,
Posted By:
1 people found this review helpful

Bought a pair of these brackets for my 94 Honda Civic and I am very pleased. Good quality and fitment was okay, it could be better. It lined up where the bolts go but it wasn\'t perfect. I had to have someone sit on the seat so that with the weight of a person the bracket would move down further and after that the two front bolts lined up perfect! I\'d recommend these to anyone!

Was this rating helpful to you?   Yes No
  A perfect fit!,
Posted By:

Very low profile, uses existing factory holes, very well made!

Was this rating helpful to you?   Yes No
  Great Fit,
Posted By:
2 people found this review helpful

Bought a set of these Brackets for my 2002 Saleen Mustang and they went in extremely easy. Bought the double locking brackets and I am very happy with them. They like the seats fit like a glove.

Was this rating helpful to you?   Yes No
  TJ seat bracket,
Posted By:
1 people found this review helpful

Easy to install wish it would tilt forward like the stock bracket. Stock bracket broke or would have not purchased this bracket. The quality of this bracket is excellent just not what I thought.

Was this rating helpful to you?   Yes No
  bracket for celica,
Posted By:

Very good seller i recommand ++
Trs bon vendeur de confiance, envoi rapide


Was this rating helpful to you?   Yes No
  Descent,
Posted By:
2 people found this review helpful

I installed a Moab seat and bracket in my 96 s10 se. It was a fairly easy instalation. I would have prefered the the corners of the main frame and the mounting legs would have been rounded. I didnt take the time to do that yet.

Was this rating helpful to you?   Yes No
  Well made, double locking sliders did not fit.,
Posted By:
4 people found this review helpful

Bracket fit car well however the double locking sliders I ordered did not fit. I have since sold my seat so I can not recall exact info. I believe the sliders were not wide enough to fit my Corbeau Sport seat. The sliders are joined by a lever that gives them a fixed spacing. I ended up using the single locking slider kit.

Was this rating helpful to you?   Yes No
  Simple construction - fit as expected.,
Posted By:
2 people found this review helpful

Simple construction - fit as expected.

Was this rating helpful to you?   Yes No
  Easy Install, Minor Adjustments,
Posted By:
3 people found this review helpful

I was able to install these myself with minimal troubles. I had to use a hammer to make minor bends to the brackets for the perfect fit. Overall, they were quality pieces.

Was this rating helpful to you?   Yes No
  Worked like a charm,
Posted By:
1 people found this review helpful

Perfect fit...easy to install...great friendly people...could not ask for more.

Was this rating helpful to you?   Yes No
  240SX Seat Rails,
Posted By:
3 people found this review helpful

the Rails fit perfectly and i had no problems installing them, the only thing i had wrong with them is that they made my Corbeau Forza seat sit really high, higher that the stock seat did. if you are looking for a low seat rail, do not get this one.

Was this rating helpful to you?   Yes No
  custom seat brackets,
Posted By:
1 people found this review helpful

For 69 Camaro the brackets lined up well, although took a while to figure out the right way to assemble them as when recieived were assembled wrong.

Was this rating helpful to you?   Yes No
  Chevy S-10 seat brackets,
Posted By:
2 people found this review helpful

These seat brackets worked like a charm, they lined up with the factory bolts. I was using them to replace a bench seat so I had to drill holed for the inner bolts and it worked fine. The seat do sit a little higher than the stock bench seat did but I am 5'9" tall so it worked out fine. I would buy these again.

Was this rating helpful to you?   Yes No
  240SX brackets,
Posted By:
2 people found this review helpful

Fitment on these was superb, everything lined up just like the factory pieces and bolted in without fuss, the slider works well and glides easily.
For the price this bracket is a great buy. I put them in my 240SX and they sit as low as possible and only raise the ride height just a bit.


Was this rating helpful to you?   Yes No
  seat bracket,
Posted By:
1 people found this review helpful

The brackets worked great, easy to install the seats in my jeep wrangler.

Was this rating helpful to you?   Yes No
  66-77 Bronco Seat Bracket,
Posted By:

The driver's side bolted up pretty easily. The washers between the slider and the bracket were so close together that the rear right bolt is really hard to put in. Have to take the slider and bracket apart, put the bolt in, put it back together and then use a wrench to tighten the bolt down. Not the best design of all time.

Passenger bracket was worse. It didn't line up with the factory holes. I had to weld a tab to the rear of the bracket to reach the bolt hole in back, and added spacers underneath the right leg because it was too short.

It all functions well, now that it's installed, but don't expect a 10 minute bolt-in set of seats.


Was this rating helpful to you?   Yes No
  91 vw jetta,
Posted By:
1 people found this review helpful

for the mk2 vw's you will have to modify these to get an appropriate seating position. much to high and no rearward lean if left alone. what i did was significantly shorten the rear posts and redrilled the mounting holes. i also redrilled the front bolt hole. good news is all this can be accomplished with an electric cutoff wheel and power drill. aside from that, the sliders function great and offer plenty of adjustability.

Was this rating helpful to you?   Yes No
  Works as expected,
Posted By:
1 people found this review helpful

I used these brackets on a '96 Corvette. The brackets worked very well for my application. They are sturdy and lock securely. Due to the way that this model Vette floor is made, I fabricated my own vertical risers to support the seat bracket at the proper angle.

Was this rating helpful to you?   Yes No
Click here to review this product
(Reviews are subject to approval)