Order Now: We Pay The Shipping!
NEED HELP? CALL +1-800-880-0960
Call: (800) 880-0960
FREE SHIPPING! (Limited Time Offer)
Buy now -- Free Shipping!
Planted Seat Brackets (Vehicle Specific Bolt-In)

Planted Seat Brackets (Vehicle Specific Bolt-In)

Average Customer Rating:
(4 out of 5 based on 4 reviews)

Read Reviews | Write a Review
Step 1. Select Your Vehicle Step 2. Select Driver or Passenger or Both
Driver Side Bracket Only
Passenger Side Bracket Only
Both Driver & Passenger Side Brackets (+$185)
Step 3. Don't Forget Sliders
No, thanks
One Slider for One Seat Base 00493 (+$85)
Two Sliders for a pair of Seat Bases 00493x2 (+$170)
Step 4. Add Mounting Hardware Kit
No, Thanks
One Hardware Kit for One Seat Base SHK (+$12)
Two Hardware Kits for a pair of Seat Bases SHKx2 (+$24)

for 1, including selected options


Newest Application: Chevrolet Corvette C3, 1968-1982!

Most racing seat brackets are made to fit one specific brand of seat. Problem is, the bolt patterns on different seat brands are different, so trying to use Brand A seat bracket on Brand B racing seat may lead to disappointing results.

Planted Technologies has changed all of that. Their brackets are made to fit nearly any brand of racing seat available! Bride, Cobra, Corbeau, Momo, OMP, Racetech, Recaro, Sparco, Status are all fit correctly. Most other should as well, but call before ordering to confirm fitment for brands not listed here.

Just as importantly, Planted Technologies makes an extremely high quality racing seat bracket. All of the custom brackets sold on this page are made out of 3/16-inch plate steel--hence the name! When you bolt your racing seat into the car with one of these brackets, it is Planted--for sure! Durable powder coating ensures that Planted Seat Brackets look great and last through years and years of use.

Note that Planted Technology brackets are made to mount to the slider of the racing seat. This means if you purchase a seat without a slider you will want to get the slider for that seat. Alternatively, because of the plate-style design of the Planted Technology brackets, the talented installer can drill the Planted Seat Bracket to accomodate seats without brackets.

Note 1: Seat belt tab on inboard side only

Note 2: Seat belt tab on inboard and outboard sides

Note 3: LOW - Mounts to floor not pedestal

Note 4: LOW - For Side Mount Seats Only

Note 5: WITHOUT auto seat belt retractor

Note 6: Deletes stock seat belt receptacle

Note 7: Angled Rear Tabs

Note 8: *Flat Rear Tabs*

Note 9: *Passenger bracket a bit taller than driver

Note 10: Seat belt tab on inboard side only

Note 11: May not fit all C3 Chassis, see online diagram


Product Reviews

  Seat height issue,
Posted By:

Although these brackets are well constructed and installed in the blink of an eye they are extremely high and raise the seating height to near even or above the roll bar which in my opinion is not a good idea. Wind, Roll over protection is all wrong. I would have said excellent if they were at the same height as the original seat frame but as is you will need to cut at least 1.5 inches and have them welded back up to correct seating on both sides.

Was this rating helpful to you?   Yes No
  Planted seat base,
Posted By:

Excellent product. Loads of adjustability. Straight forward installation.

Was this rating helpful to you?   Yes No
  Very solid and strong, best out there probably.,
Posted By:

I "had" a really squeaky Sparco Evo US seat that was driving me nuts with the noise. I had it bolted via side mounts directly to another brand's seat bracket. As a last resort, I decided to buy the Planted bracket as well as the Sparco slider. I figured the noise might actually get worse, but instead it's COMPLETELY silent now. The Planted bracket is noticably stiffer than the other brand's. I did cut a small corner of the bracket off in order to fit a long bolt through along with a ratcheting closed in wrench. Witht he bolt holes aligned a little on the short side, it just means when tightening the bracket down to the floor pan, things are TIGHT, and that's a VERY GOOD thing. Planted has a solid product.

Was this rating helpful to you?   Yes No
Posted By:

They fit my bolt holes and the seat....but....for the price they should have come with bolts to mount to the seat. Also I had to bend the accessory tap out of the way to allow the seat to fully slide...not a big issue but slightly annoying.

Was this rating helpful to you?   Yes No
Click here to review this product
(Reviews are subject to approval)